Audio-Technica AT 2010 Cardioid Condenser Handheld Microphone
The AT 2010 Cardioid Condenser Handheld Microphone is Audio-Technica’s answer to the vocal performer’s quest for an affordable mic that mirrors studio-quality articulation on stage.
AT2010 Stage Mic Mirrors Studio Clarity
AT2010 Cardioid Mic contains the 16 mm low-mass diaphragm identical to that found in Audio-Technica’s AT2020 side-address studio condenser, so its intelligibility is superior. This Handheld Condenser Mic is ideal for the vocal jazz virtuoso, singer/songwriters, use in houses of worship - any solo vocalist.
AT2010 reinforces vocals in a smooth, natural presence with extended frequency and transient response in a Handheld Cardioid Condenser.
Unique to this mic are high SPL-handling, wide dynamic range, and a brand of versatility born out of the vocalist-preferred Audio-Technica AT 20 series, then tailored for live performance.
The AT2010 Handheld Condenser Microphone is designed for better isolation of sound sources, through Audio-Technica’s Cardioid polar pattern which minimizes side and rear sound pickup.
Crystalline vocals are protected from plosives and sibilance by AT2010’s multi-stage grille. The XLRM type connector on this Cardioid Condenser Mic is fitted with gold-plated contacts to resist corrosion. Its Audio-Technica tough all-metal design will carry your voice for miles and years to come.
The Audio-Technica AT2010 Cardioid Condenser Handheld Mic weighs 233g (8.2oz) and measures 179.1 mm (7.05”) long, 50.8 mm (2.00”) maximum body diameter. The Specs Reflect Quality:
· Element: Fixed-charge back plate permanently polarized condenser
· Polar Pattern: Cardioid
· Frequency Response: 40 – 20,000 Hz
· Open Circuit Sensitivity: -48 dB (3.9 mV) re 1V at 1 Pa
· Impedance: 100 ohms
· Maximum Input Sound Level: 136 dB SPL, 1 kHz at 1% T.H.D.
· Dynamic Range (Typical): 113 dB, 1 kHz at Max SPL
· SNR: 71 dB, 1 kHz at 1 Pa
· Phantom Power Requirements: 48V DC, 2 mA typical
This Audio-Technica Cardioid Condenser Handheld Mic is designed for use in professional applications with remote power, calling for 48V DC phantom power through a mixer or console, or a separate, in-line source. The AT2010 delivers each vocal inflection you utter on stage…up close and personal.