Smart Choices Made Easy

Home > Computer Music > Microphones > Audio Technica AT 2020

Audio Technica AT2020 Cardioid Condenser Professional Microphone

Unmatched in its class, AT2020 is a high performance, well constructed professional home and project studio Mic that’s priced so low you’ll buy two without wallet-pain. Audio-Technica’s rugged metal design and tight standards are honed into a handsome side-address Cardioid Condenser built to tough out years and miles of wear.

AT2020 Has Low-Mass Diaphragm for High SPL Handling

The Audio-Technica AT2020 is quiet on its own, delivering clear, accurate sound from almost any source, including drums, percussion instruments, guitars, vocals, woodwinds…play anything through it! Its response for extended frequencies and transience carry the low end through without boominess and infuse a pleasing trace of brightness in the high end that stays warm, smooth…natural.

Audio-Technica Amply Accessorizes AT2020

The AT2020 Cardioid Condenser comes complete with a swiveling, threaded metal stand mount (for 5/8” -27 threaded stands; 5/8” -27 to 3/8” -16 threaded adapter) allowing you to pivot the Mic into any position, and facilitating quick access to its XLR jack with the undeniable “click” of a secured connection. Pop your Audio-Technica in its soft travel pouch and go!

Audio-Technica’s AT2020 specs will blow your mind – not your dough - a Cardioid Condenser with dynamic range so impressive you’ll be tempted to use it in applications where you’d thought no condenser should go. It is simply a great addition to any Mic cabinet, even in a major studio. Scan below:

Element: Fixed Charge back plate, permanently polarized condenser
Polar Pattern: Cardioid
Frequency Response: 20 – 20,000 Hz
Open Circuit Sensitivity: -37 dB (14.1 mV) re at 1 Pa
Impedance: 100 ohms
Maximum Input Sound Level: 144 dB SPL, 1 kHz at 1% T.H.D.
Noise: 20 dB SPL
Dynamic Range (Typical): 124 dB, 1 kHz at Max SPL
Signal-To-Noise Ratio: 74 dB, 1 kHz at 1 Pa
Phantom Power Requirements: 48V DC, 2 mA typical
Weight: 12.1 0z (345 g)
Dimensions: 6.38” (162.0 mm) long, 2.05 (52.0 mm) maximum body diameter
Output Connector: Integral 3-pin XLRM-type

Audio-Technica AT2020 – clarity…quality for project and pro recordists alike.

Audio Technica website:Microphones


  ©2004-2015 Contact | Copyright | Advertising Info | Legal | Privacy | Directory | DJ Sitemap